One of the simplest types of centrifuge widely used in the industry. The solid material is scooped out manually from the top of the centrifuge.
Advantages :
|
- Manual removal of solids results in total protection of crystal structure.
- Extremely simple operation.
- Very low solids loss in filtrate.
- Distinct separation between mother liquor and crystal enable better product quality.
Available Features:
|
- Suspension / Mounting :
- Drive and Transmission :
- Mechanical clutch pulley
- Variable Frequency Drive (Inverter)
- Fluid Coupling
- Two Speed Motor
- Reverse Current Braking
- Optional Features
- Fully Opening Outer Case for better accessibility for cleaning and maintenance
- Full Lid opening for better accessibility for cleaning and maintenance
- cGMP Construction
- Nitrogen Blanketing
- Vibration Monitoring
- Zero Speed Interlock with Speed Indicator
- Cleaning in Place
Standard Feature :
Leak Test as per Din 24 400 : Machine is tested at a pressure of 400 mbar and pressure drop is restricted to below 60mbar / hr.
Available Sizes (Basket Dia) : 24’’ (610mm) to 60” (1524mm) (Special sizes can be designed)
Volume under Lip : 45 to 800 lit per batch.
Max Permissible Load * : 70 to 800 kg per batch.
Centrifugal Force : 400 to 2000 G units - depending on size of Basket
Speed of Basket : 600 to 2500 rpm- depending on size of Basket
Material of construction : Stainless Steel , Carbon Steel, Hastelloy, Rubber Lined , Fluoro Polymer Coating / Lining viz.- Halar (ECTFE), Teflon (PFA )
Lining/ Coating can be provided not only on the contact parts but also on the exterior body for prevention from spillage and corrosive atmosphere.
* The load indicated is based on mechanical design. However output per batch depends on various other factors and may be lower than permissible load.
Please fill up our Enquiry Form for your requirement.
|
 |
|
|
|
